 |
Food
and Drug Administration (FDA)
approval
necessary for a coating with direct/indirect
food contact. The materials used
in pastel formulations are included
in one or more sections of Title
21, Code of Federal Regulations,
listing materials used in articles
for processing, handling or packaging
food (no more than 8% alcohol).
We routinely certify to this specification.
|
| |
 |
United
States Department of Agriculture
(U.S.D.A) approval
was applied to coatings used in
federally inspected meat or poultry
packing plants.Requirements for
this approval were removed in
1995.
|
| |
 |
NSF
International (National Sanitary
Foundation) certification
required for coatings used in
potable water applications (interior
coatings for valves, hydrants,
tanks, pipelines and certain restraunt
equipment). The cured coating
must be certified to NSF International
Standard 61. Our coatings are
listed with NSF through Nemco
Equipment.
|
| |
 |
Underwtiters
Laboratories Inc (U.L.)
necessary for coatings applied
to cold-rolled and pre-treated
steel, providing protection against
atmospheric corrosion. All Urethane
and TGIC coatings we make are
recognized under Section DTOV2.
Cards are available on request.
|
| |
 |
Automotive
Approvals
are sometimes necessary for coatings
used by OEM's and their immediate
suppliers. This array of specifications
is often mis-leading and can be
readily confused.Each OEM should
be consulted as to their requirements;
our coatings are routinely certified
for many of these applications.
|
| |
|
Our Enhanced Polyster Powders are available for exterior aluminum Architectural Trim and Components. These meet or exceed AAMA 2604-98 and 2604-02 specifications. These coatings exhibit superior hardness to Kynar filled powders with the best "stucco resistance" of wet or Kynar products.
We offer a Five Year Limited Warranty to Coaters with accepted processes. please ask your representative for details. |
|
