Is necessary for a coating with direct/indirect food contact. The materials used in pastel formulations are included in one or more sections of Title 21, Code of Federal Regulations, listing materials used in articles for processing, handling or packaging food (no more than 8% alcohol). We routinely certify to this specification.
was applied to coatings used in federally inspected meat or poultry packing plants. Requirements for this approval were removed in 1995.
required for coatings used in potable water applications (interior coatings for valves, hydrants, tanks, pipelines and certain restaurant equipment). The cured coating must be certified to NSF International Standard 61. Our coatings are listed with NSF through Nemco Equipment.
Is necessary for coatings applied to cold-rolled and pre-treated steel, providing protection against atmospheric corrosion. All Urethane and TGIC coatings we make are recognized under Section DTOV2. Cards are available on request.
are sometimes necessary for coatings used by OEM's and their immediate suppliers. This array of specifications is often mis-leading and can be readily confused. Each OEM should be consulted as to their requirements; our coatings are routinely certified for many of these applications.
Our Super Durable Polyester and Ultra Durable Powders are available for exterior aluminum Architectural Trim and Components. These meet or exceed AAMA 2604 and 2605 specifications. These coatings exhibit superior hardness and stucco resistance versus the Kynar based liquid and powder products. We offer Five and Ten Year Limited Warranties to applicators with approved processes. Please ask your representative for details.