Americoats - Its all about exceeding your expectation! Site map  |   Contact Us         
 Home    About us    Certification    Technology    Technical Support    Product Availability    Technical Informaton       
Epoxy
Hybrid
TGIC
Urethane
Silicone

Pretreatment

Shotblasted substrate
Iron Phosphate
Zinc Phosphate
Galvanized Zinc
50 - 90% Heat Reactive Binder/Vehicle Resin(s)/Polymer(s)
Curing Agent(s)
Fundamental Film Properties

1 - 5% Additives
Generally Serve a Specific Purpose
Not an Integral/Chemical Part of Binder

0 - 40% Color Pigment
Organic & Inorganic
Color and Opacity

0 - 40% Non-Color Pigment
Non-Hiding, Little Color
Gloss Control, Sandability, Corrosion, Etc.

0 - 10% Blended Formula Additives
Application/Fluidization
Film Aesthetics:
Metal Flake
Mica
Pearlescent
 
Environmentally
For best results, powder coatings should be stored and applied in a climate controlled area.
Temperature: Below 80 °F (27 °C)
Relative humidity: 50 to 60% (Corona)
< 40% (Tribo)

Specific product data is available in the products
 
Curing Conditions
Fast Cure 1 - 5 minutes at 400 to 475 °F (204- 246 °C)
Standard Bake 20 minutes at 300 to 400 °F (149 - 204 °C)
Low Bake 30 minutes at 240 to 300 °F (116 - 149 °C)
UV curable see Liquid Technology
 
Substrates Support
Aluminum
Brass
CRS/HRS
Electrocoat
Fiber Reinforced Plastics
Galvanized Steel
Heat Resistant Plastics
Sheet Molding Compound
Wood
 
 
 
   
 
 
  © Copyright 2008. Americoats.Com | Website Designed & Developed by : Futerox Interactive